Removing a standalone spa or hot tub in Newcastle or Lake Macquarie is a more achievable project than removing a full swimming pool, but the right approach depends entirely on what type of spa you have, where it is, and whether it’s integrated into a deck or structure. The short version: portable above-ground spas are usually a half-day job; in-ground or deck-integrated concrete spas can take two to three days and cost $4,000 to $15,000.
This guide covers all common spa types and what removal involves for each.
Types of Spas and Hot Tubs
Portable (freestanding) spa/hot tub: The most common type in residential properties, a self-contained acrylic or rotomoulded shell with integrated pumps and jets. Typically sits on a concrete pad or deck. Brands include Vortex, Onga, Spa World, Clearwater, and many imported models. Weight when empty: 200-700kg.
In-ground concrete spa: A concrete shell built into the ground, often adjacent to or connected to a swimming pool. Built the same way as a concrete pool, shotcrete or formwork poured. Typically 2-6sqm water surface area.
In-ground fibreglass spa: A fibreglass shell excavated into the ground, often installed as a standalone unit or adjacent to a fibreglass pool. Similar to a plunge pool in construction.
Deck-integrated spa: A portable or semi-portable spa that has been built into a deck structure, surrounding the spa with timber or composite decking, with the spa sitting in a cut-out. The deck must be removed or modified before the spa can be extracted.
Concrete in-ground spa attached to a pool: Some older Hunter region properties have a separate concrete spa built adjacent to the main pool, connected by plumbing but structurally separate. These are removed as part of or separately from a main pool removal.
Removal Method by Type
| Spa Type | Preferred Method | Key Equipment | Typical Duration |
|---|---|---|---|
| Portable freestanding (small, <400kg) | Tilt and slide; truck with ramp | Labour | 2-4 hours |
| Portable freestanding (large, >400kg) | Crane or telehandler | Crane | 4-8 hours |
| Deck-integrated portable | Remove deck first, then crane extract | Crane + demo tools | 1-2 days |
| In-ground fibreglass spa | Crane whole extraction or break-up | Crane or excavator | 4-8 hours |
| In-ground concrete spa | Hydraulic break-up + excavation | Excavator | 1-2 days |
Removing a Portable Spa
For most portable spas in good access situations, sitting on a back patio with gate access, removal is straightforward:
-
Drain the spa: Connect a submersible pump to empty the water. A standard spa holds 1,000-2,000 litres, takes 30-90 minutes to drain. Discharge to sewer, not stormwater.
-
Disconnect power: The spa must be electrically isolated before anyone touches it for removal. Portable spas plug into a hardwired disconnect box (weatherproof outdoor outlet), this should be isolated at the switchboard by a licensed electrician before the spa is moved.
-
Disconnect the hardwired input: Most portable spas in Australian installations are connected via a 32A or 40A hardwired disconnect point with a cable running through the deck or patio to the spa. A licensed electrician disconnects this cable.
-
Physical removal: Depending on weight and access, the spa is either:
- Tilted and slid onto a truck ramp by a team of two to four people
- Craned out using a small pick-and-carry crane or telehandler
- Dismantled in place (if the unit is too large to extract whole)
For spas weighing over 400kg (most large 7-8-seat spas) in any scenario with restricted access, crane extraction is the safest method. Trying to manhandle a 600kg spa across a backyard risks personal injury and property damage.
Removing a Deck-Integrated Spa
If a spa has been built into a deck, the deck needs to be removed (or sections of it cut back) to expose the spa and allow extraction. This adds decking demolition work to the scope:
- Estimate $500 to $2,500 for deck removal, depending on deck size and material
- Confirm whether you want the deck fully demolished or just the section around the spa
- Composite and hardwood decking has some resale or reuse value if removed carefully
After deck removal, the spa extraction follows the same process as a freestanding unit.
In-Ground Concrete Spa Removal
An in-ground concrete spa is removed using the same method as a concrete pool, hydraulic breaking with an excavator attachment, then excavation of the broken material. Steps:
- Drain and disconnect equipment and plumbing
- Break the shell using a hydraulic hammer
- Excavate the broken concrete from the hole
- Backfill the excavation with granular material in compacted layers
- Surface finish as required (turf, paving, garden)
In-ground concrete spa removal costs: $4,000 to $12,000 depending on size, access, and depth of excavation.
What to Do With a Working Spa
Before committing to removal, consider whether the spa has resale value:
Portable spas in good condition (less than 8 years old, all jets and heating functional) sell for $2,000 to $8,000 on Facebook Marketplace and Gumtree in the Hunter region. A spa that’s clean, has a working cover, and has all jets operational is genuinely desirable on the second-hand market.
Key factors for resale value:
- Age (under 8 years is much more saleable)
- Brand (Vortex, Onga, Hydropool, recognisable brands attract more buyers)
- All jets and heating functional
- Shell in good condition (no crazing, clear water quality)
- Cover in usable condition
List the spa on Facebook Marketplace with photos and video of the jets running. State the make, model, year (if known), and dimensions. Offer a two-week window for buyer pickup and arrange this before your removal contractor arrives.
If the spa doesn’t sell, it goes for disposal:
- Fibreglass/acrylic shell: Typically landfill (limited recycling options)
- Foam insulation panels: Landfill
- Stainless steel frame and pumps: Scrap metal recycling
- Electronic controls and jets: E-waste
Cost Summary: Spa and Hot Tub Removal in Newcastle
| Removal Scenario | Estimated Cost (2026) |
|---|---|
| Portable spa, good access, <400kg | $800 to $1,800 |
| Portable spa, requires crane | $1,500 to $3,500 |
| Deck-integrated spa (deck demolition + removal) | $2,500 to $6,000 |
| In-ground fibreglass spa | $3,500 to $8,000 |
| In-ground concrete spa | $4,000 to $12,000 |
These estimates cover removal, disposal, and basic site tidy. Backfilling an in-ground spa excavation and surface reinstatement is included in the in-ground estimates above. Concrete pad removal (if the spa was on a slab you want removed) is separate.
Pool Safety Register: Does a Spa Need to Be Registered?
Yes, if your spa holds water to a depth of 300mm or more and a child under five years could access it, it is classified as a swimming pool under NSW law and must be registered on the NSW Swimming Pools Register, with appropriate barriers maintained.
After removal, deregister the spa from the register. Most portable spa owners haven’t registered their spa (many are unaware of this obligation), so check the register to confirm whether deregistration is needed.
What to Do With the Space
After spa removal, options for the space include:
- Extend the deck or paving to fill the spa footprint
- Garden bed or planting for a low-maintenance option
- Turf or lawn to return the area to open yard space
- Pergola or shade structure if the spa was in a sunny entertaining area
See our backyard design ideas after pool removal for broader inspiration, many ideas applicable to pool areas also work for spa areas.
Frequently Asked Questions
Can I remove a portable spa myself? Small portable spas (under 300kg) with good gate access are achievable for a DIY team of three or four people. Larger units need either a crane or specialist removal. The electrical disconnection must be done by a licensed electrician regardless. See our DIY vs professional removal guide for more.
How do I drain a hot tub before removal? Use a submersible pump or connect a garden hose to the drain fitting (most spas have one). Discharge to sewer (via laundry or toilet access point), not to stormwater, spa water contains bromine, chlorine, or other chemicals. A standard spa takes 45-90 minutes to drain.
My spa is cracked and can’t hold water, is it worth trying to sell? Probably not. A non-functional spa has very limited second-hand market appeal. However, it still needs proper removal and disposal, it can’t simply be abandoned in the yard.
Does the concrete pad under my spa need to come up? Not necessarily. If the pad is in reasonable condition and doesn’t affect future use of the space, it can remain. If you want turf or garden in the area, the slab will need to come up. Add $500 to $1,500 to your removal cost if slab removal is needed.
How long does spa removal take? A portable spa with crane access: half a day. A deck-integrated spa: one to two days. An in-ground spa: one to three days depending on type and access.
Ready to remove your spa or hot tub in Newcastle or Lake Macquarie? Contact Hunter Pool Removals for a free quote, all spa types are covered, from portable units to in-ground concrete.